This article will answer the following question: “Is Jim Beam Flammable?”. We will show how flammable all Jim Beam Bourbon whiskeys are, and how easily they can catch fire.
Is Jim Beam Flammable?
All versions of Jim Beam Bourbon can catch fire if they are 80 proof or above. Below 100 proof, although, the liquors can’t catch fire so easily, especially if they’re cold. The flashpoint is low, so flammable vapors will be unleashed from any Jim Beam bottle slightly warmed.
What is Jim Beam?
Jim Beam is a type of Bourbon whiskey. It’s produced in Clermont, Kentucky. The liquor is being made ever since 1795 but under different names. It was only interrupted by Prohibition.
After Prohibition, when any form of alcohol was banished from being produced, imported, and transported, the whiskey was rebranded to honor James B. Bean, who restarted the business.
Jim Beam® Kentucky Straight Bourbon is 80 proof (40% ABV). The exact amount of alcohol most whiskeys have. This much ABV is enough for a drink to catch fire.
What is ABV?
ABV is an abbreviation for alcohol by volume. It is a standard measure to write down how much ethanol (common alcohol) ratio is contained in a beverage.
It’s defined as the quantity (in ml) of pure ethanol in 100ml of the drink, at 20ºC (68ºF). The ABV number gives us information on how much alcohol a beverage has.
It’s important to note that ABV is not the same as volume fraction, a property commonly used in Chemistry.
A drink that has, let’s say, 50% ABV doesn’t necessarily contain 50ml of alcohol in 100ml of the whole drink, but a little bit more. This is because the volume of a mixture changes when we mix two different things. But this difference is not big, no more than 2.5%.
Can Jim Beam burn?
Yes. Jim Beam can burn in mild conditions if a naked flame is too close to it. But it can’t self-ignite.
Jim Beam’s flashpoint is around 26ºC (79ºF). But what does this mean? Well, it means that a glass of Jim Beam starts to evaporate in very easily achievable temperatures.
When a flammable substance reaches a vapor state, it also reaches the most flammable state. But don’t be afraid, it’s not something so hazardous. You can keep drinking it normally.
Although, there’s a considerable fire risk in drinking a distilled beverage while smoking, or vice-versa. If you do this often, consider doing it outside or at least leave windows opened for better ventilation.
Jim Beam is not expected to burst in flames, but it’s not impossible for it to happen. A combination of whiskey + naked flames and clothes (or furniture) could be catastrophic.
Can Jim Beam catch fire easily?
No. Normally, beverages are only considered readily flammable if they have 50% ABV or more. If you light a match and toss it, combustion wouldn’t happen so easily, especially if it’s cold.
A beverage like Jim Beam® Kentucky Straight Bourbon (White) would only catch fire if is tossed into big flames, or else if it is heated first.
But it doesn’t need to be warm. At room temperature, it might be enough (close to 30ºC/86ºF).
Also, due to Jim Beam’s low flashpoint, flammable vapors would arise from a cup of it, and they could catch fire. But only if there’s a naked flame close by.
Auto-ignition is not expected. Even if a glass of liquor is set on fire, on its own is not a big deal because the flames would be small, but it could serve as the ignition for other things, including yourself.
But the thing is, alcohol can evaporate much easier than water. So if a beverage below 50% ABV is mildly heathen, the alcohol would just evaporate before burns. But the hazard is always present.
Many people have Jim Beam’s whiskey on ice. The colder the beverage is, the less flammability it presents. But no matter how cold the drink is, safety precautions are required in any case.
Smoke while drinking, for example, is always hazardous, especially if you leave the glass and cigarette in the same hand. The smoke cannot ignite your liquor, but a burning amber might.
Which Jim Beam Bourbon is the most flammable?
We can rate how flammable Jim Beam Bourbons are according to their level of alcohol.
1º Jim Beam Single Barrel – 108 proof (54% ABV)
2º Jim Beam Devil’s Cut – 90 proof (45% ABV)
3º Jim Beam Black – 86 proof (43% ABV)
3º Jim Beam Double Oak – 86 proof (43% ABV)
4º Jim Beam White (Original) – 80 proof (40% ABV)
4º Jim Beam Rye – 80 proof (40% ABV)
As you can see, the alcohol content varies, and the flammability does too, accordingly. Jim Beam Single Barrel and Devil’s Cut are definitely flammable, be the other ones are not so much.
But still, all versions can catch fire. It will be hazardous to leave any bottle of Jim Beam close to a fire, intense heat, sparks, or any other source of ignition.
If the bottle is heated while closed, there’s also a risk of explosion.
In 2019, a fire in a Jim Beam warehouse destroyed about 45.000 (thousand) barrels of the bourbon, according to the New York Times.
What is the most flammable liquor?
The flammability of liquor is higher when the alcohol content is as well.
We can say that the most alcoholic liquid in the world would be pure alcohol. Although, there’s no booze that’s so strong. Only reactants used in labs can reach nearly 100% alcohol.
But perhaps the most alcoholic liquor in the world is the Polish Spirytus Stawski, a vodka that reached incredibly 192 proof (96% ABV)!
What does Jim beam tastes like?
Whiskeys can have many kinds of flavors, notes, and tastes. The final perception of taste is not only achieved by our mouths but a multisensorial experience.
Besides the taste in our tongues, the smell, sight, touch, and even in each glass it’s presented can infer how we perceive a food or beverage. These are the so-called organoleptic properties.
Jim Beam contains no additives or colorings. Its taste comes all from the raw materials, aging, and distillation process. It’s made from corn, rye, and barley, in a proportion never revealed.
Jim Beam’s official website points out five overall tastes each of their liquors can have, they’re: sweet, char, fruit, oak, and grain.
Here’s an overview of what some Jim Beam liquor may taste like:
- Jim Beam® Kentucky Straight Bourbon: Grain and oak tastes are predominant. The flavor is medium-bodied, with casual hints of caramel and vanilla. The oaky vanilla aroma is mixed with a spicy backdrop.
- Jim Beam® Rye: Bold and Spicy. It has a little black pepper taste, rounded by hints of vanilla and oak. Has a rye spiciness aroma and sweet flavour.
- Jim Beam® Devil’s Cut: has deep color, aroma, and character. Char aroma is predominant, with a smoky backdrop. It’s full-bodied with intense oak and vanilla notes. It’s 90 proof.
- Jim Beam® Single Barrel: every bottle has unique characteristics because it came from only one barrel. The oak flavor is balanced with vanilla and caramel, and the aroma is slightly spicy.
- Jim Beam® Black: Char taste is predominant. The extra aging years give a full-bodied flavor with notes of caramel and oak. The aroma is a mix of caramel, oak, cinnamon, and vanilla.
- Jim Beam® Double Oak: the original Jim Beam is barreled again, so the oakiness and char tastes are higher. The caramel and toffee flavours are balanced with the oakiness and the aroma is of caramel, vanilla, and toasted wood.
There are other more aromatic versions like Orange, Apple, Vanilla, and Honey, but also versions to-go and other limited ones.
Jim Beam Bourbons can be considered flammable if they are 100 proof or above. However, if they possess alcohol content as big as 80 proof, they can already catch fire if the ignition is provided.
Frequently Asked Questions (FAQS): “Is Jim Beam Flammable?”
is jim beam gluten free?
Jim beam is mainly made of gluten-free grains like corn and maize, but other products made with wheat can be used during fermentation.
But Jim Beam is a distilled beverage, no protein can get through the process. Distilled liquors are always considered gluten-free unless there’s an additive that implies otherwise.
jim beam is whiskey or bourbon?
Jim Beam is a Bourbon whiskey made in Kentucky, U.S. It follows the rules of bourbon, so it is considered one. Also, like any kind of bourbon, it’s also named whiskey.
What mixes good with Jim Beam?
A Jim Beam’s Bourbon can be mixed to create many drinks. Here’s a list of some of them and what are their ingredients (most of them also need ice!):
- Black Manhattan: Jim Beam Black, Sweet Vermouth, and Fresh cherries.
- Clermont Whiskey Sour: Jim Beam® White, orange juice, lemon juice, sugar syrup, egg white (optional), Orange wedge, and cherry.
- Honey and Lemonade with lime: Jim Beam® Honey, Lemonade and fresh lime.
- Jim Beam Balck and Ginger Ale: Jim Beam Black®, Ginger ale, and Fresh lime.
- Jim Beam Citrus HighBall: Jim Beam® White, fresh lemon juice, Soda water, Crushed ice, Slice of lemon, and Sprig of rosemary.
- Jim Beam rye and apple juice: Jim Beam® Rye, Fresh cloudy apple juice, and Green apple slices.
- Jim Beam White and cola with lime: Jim Beam® White, Cola, and fresh lime.
- Sazerac:60ml Jim Beam® Rye, sugar syrup, dashes of bitters, dashes of Peychauds Bitters, Absinthe (rinse), and Lemon twist for garnish.
- The Devil’s Buck: Jim Beam® Devil’s Cut®, Ginger beer, dashes of bitters, and Lime wedge.
- The Devil’s Drop: Jim Beam® Devil’s Cut®, fresh lemon juice, Limoncello, sugar syrup, fresh spearmint leaves, Lemon wheel, and mint sprig.
Now you know what kind of things people usually mix with different Jim Beam Bourbons. You can follow their recipe, or create your own using similar ingredients!